dakar
09-23-2006, 01:55 PM
Okay using a 5.2vDC @ 800ma to drive 10 LED's here's your wiring diagram.
You'll need 1/4W 68 ohm resistors for each LED.
Just for good measure some detailed info
each 68 ohm resistor dissipates 61.2 mW
1/4W resistors are fine for your application
together, all resistors dissipate 612 mW
together, the diodes dissipate 990 mW
total power dissipated by the array is 1602 mW
the array draws current of 300 mA from the source.
You'll need 1/4W 68 ohm resistors for each LED.
Just for good measure some detailed info
each 68 ohm resistor dissipates 61.2 mW
1/4W resistors are fine for your application
together, all resistors dissipate 612 mW
together, the diodes dissipate 990 mW
total power dissipated by the array is 1602 mW
the array draws current of 300 mA from the source.