reefkid58
04-10-2010, 09:01 PM
Hi all,
So, came home today to find my light fixture, coralife CF 65x4, dark and only my dawn/dusk striplight on. HELP! I disconnected all four lights, both ballasts, unplugged and replugged wiring inside, and am still having the same problem. When i hit the switch to turn it on, all i get is a brief flash, and then nothing. After working with it for a while, i discovered that if i only plug one light in on each switch that it will turn the one bulb on.
let me draw a picture. lets say the bulbs are labelled, RF and RR for right/front and right/rear respectively, and LF and LR for left/front and left/rear respectively. If i plug one bulb into RF and one into RR they work fine. Likewise, if i plug a bulb into LF and into LR they do too. However, if i plug both bulbs into LF and RF i get the flash followed by nothing again. I am about to set it back up on my tank with only two bulbs running just to try and keep my corals alive until i can figure this out.
anyone?
p.s. if i plug a bulb into left/front, and i plug a light into right/rear, they work fine also. it appears that if both lights are on the same circuit they just wont work. Thank you for your time and input,
sincerely,
Adam
So, came home today to find my light fixture, coralife CF 65x4, dark and only my dawn/dusk striplight on. HELP! I disconnected all four lights, both ballasts, unplugged and replugged wiring inside, and am still having the same problem. When i hit the switch to turn it on, all i get is a brief flash, and then nothing. After working with it for a while, i discovered that if i only plug one light in on each switch that it will turn the one bulb on.
let me draw a picture. lets say the bulbs are labelled, RF and RR for right/front and right/rear respectively, and LF and LR for left/front and left/rear respectively. If i plug one bulb into RF and one into RR they work fine. Likewise, if i plug a bulb into LF and into LR they do too. However, if i plug both bulbs into LF and RF i get the flash followed by nothing again. I am about to set it back up on my tank with only two bulbs running just to try and keep my corals alive until i can figure this out.
anyone?
p.s. if i plug a bulb into left/front, and i plug a light into right/rear, they work fine also. it appears that if both lights are on the same circuit they just wont work. Thank you for your time and input,
sincerely,
Adam