Magnet advice from a guy that gets paid to clean tanks
Here is some magnet advice I can share. I mix my magnets up with a Magnavore 8 and a mago float on many of the tanks I clean. I also would never use a mago float as is. I think they suck unless you put a dobie scotch brite pad "sock on it. The Dobie turns even a mago float into something that can work well. You never have to replace your mago float then. It works great on acrylic tanks as well. This tip allows me to clean 8 tanks a day, everyday without breaking a sweat. On real thick tanks (like a 3 thousand I clean I double and triple up on magnets and turn them into monster magnets. If anyone wants a lesson on making a magoflaot work, I'd be happy to help teach you.
Magfloat and dobie should clean a 100 gallon tank real easy. also when using the dobie go with the grain of the grit. That means the long way of the mago float. not the short end. that way the mago float will not pop off.
Cut the yellow sponge out. insert your magnet in its place.
Here is some magnet advice I can share. I mix my magnets up with a Magnavore 8 and a mago float on many of the tanks I clean. I also would never use a mago float as is. I think they suck unless you put a dobie scotch brite pad "sock on it. The Dobie turns even a mago float into something that can work well. You never have to replace your mago float then. It works great on acrylic tanks as well. This tip allows me to clean 8 tanks a day, everyday without breaking a sweat. On real thick tanks (like a 3 thousand I clean I double and triple up on magnets and turn them into monster magnets. If anyone wants a lesson on making a magoflaot work, I'd be happy to help teach you.
Magfloat and dobie should clean a 100 gallon tank real easy. also when using the dobie go with the grain of the grit. That means the long way of the mago float. not the short end. that way the mago float will not pop off.
Cut the yellow sponge out. insert your magnet in its place.
What would you use for 1" acrylic? I was thinking of getting one of those huge magfloats.
I have a magnavore 8 but it's kind of a pain to use. Plus dropping a big magnet in a 4' deep tank is a PITA.
What would you use for 1" acrylic? I was thinking of getting one of those huge magfloats.
I have a magnavore 8 but it's kind of a pain to use. Plus dropping a big magnet in a 4' deep tank is a PITA.
I would use your 8 on one side and a mago float on the inside with a dobie. Or put a dobie on your 8 it will make it go over acrylic so much easier. Dobies go on inside of tank. Now on the outside wax the tank up. put a micro fiber shammy between the magnet and the outside of the acrylic. THAT IS VERY IMPORTANT. Also, It's expensive but I would use a Mag 8 1/2 on the outside and the mag 6er floating on the inside. That would kill the algae on your tank with ease. But 1st try the mago float and mag 8 combo. I hope I did not confuse you.