[Timezone Detection]
Create Account - Join in Seconds!

User Name: Email Address:
Human Verification

Please enter the six letters or digits that appear in the image opposite.

Water chemistry


Bookmark and Share
Page 1 of 2 1 2 Last
Results 1 to 10 of 13
  1. #1
    Sea~Horse~Whisperer - Reefkeeper CR Member
    Join Date
    Sep 2004
    Location
    Wisconsin Rapids, WI
    Posts
    1,141

    Default Water chemistry

    Can someone please make a list and post the proper chemistry levels we should be at in out tanks? Example Nitrate =0 -.10 Ph 8.0-8.2 and so on. I had a reference list but I can't seem to find it. I tried to search for them but I wasn't finding what i was looking for.


    Thanks a lot.

    Angie

  2. #2
    Reptoreef - Reefkeeper CR Member
    Join Date
    Sep 2004
    Location
    Brigham City, Utah
    Posts
    2,530

    Default

    Ammonia < 0.01 ppm
    nitrite <0.1 ppm
    nitrate < 25 ppm
    PH 8.0-8.5
    temp 72-80
    sg 1.021-1.026
    Ca 350-450
    Alk 9-12 dKH
    Phos 0
    There's nowhere else I'ld rather be... unless, of course, you're buying

  3. #3
    Whoyah - Reefkeeper CR Member
    Join Date
    Sep 2004
    Location
    Grants Pass, OR
    Posts
    1,267

    Default

    One more:

    Magnesium 1300-1500

  4. #4
    dakar - Reefkeeper CR Member
    Join Date
    Sep 2004
    Location
    NOLA
    Posts
    4,336
    First Name
    Dave

    Default

    How about Iodine/Iodide for inverts and some coral?

    1-2ppm sound reasonable?

    I know some softies thrive on it, how about SPS varieties? Anyone know if they have any demand/need for it?
    Every electronic device is manufactured with smoke stored deep inside... only a true genius can find a way to set it free.

  5. #5
    Sea~Horse~Whisperer - Reefkeeper CR Member
    Join Date
    Sep 2004
    Location
    Wisconsin Rapids, WI
    Posts
    1,141

    Default

    Thank you Repto. I appreciate it.

    How do I raise my alk? I tested yesterday using a salifert test kit and it was 8.0 dkh or 2.86 meq/L. I know it is not severly low, but I'm still having problems keeping my Calcium up.

    The next test kits being ordered are mag. and phosphate.

    Thanks,
    Angie

  6. #6
    dakar - Reefkeeper CR Member
    Join Date
    Sep 2004
    Location
    NOLA
    Posts
    4,336
    First Name
    Dave

    Default

    Angie, to raise the Alkalinty, we go the cheap route, baked baking soda, I add 4 tsp's per day any time the alk drops below 9dKH, I just mix it into a 2 gallon top off and drip it in. (just until I get the new top auto top off built)

    By baking it, you remove the majority of CO2 from it, which in turn helps reduce the raising effect on PH. I do large batches at a time (several boxes), spread it out on a cookie sheet and bake @450 degrees for about an hour, store as airtight as possible (gallon ziplock bag works great).

    I understand washing soda will work as well, but I haven't looked for it around us so haven't tried it yet, not sure what the effects on PH are either.
    Every electronic device is manufactured with smoke stored deep inside... only a true genius can find a way to set it free.

  7. #7
    Reptoreef - Reefkeeper CR Member
    Join Date
    Sep 2004
    Location
    Brigham City, Utah
    Posts
    2,530

    Default

    PH buffer is a 5:1 baking soda:washing soda. C02 will actually lower PH. Washing soda will fire up your PH quite quickly, though(hence the mix... doesn't effect PH too badly... more for the Alk. Washing soda is baked baking soda. Angie, sounds like you may need to keep up a bit more on keeping your reactor charged(PH of 12-12.5)... with evap and auto kalk top-off, you should find that your Ca/Alk levels are more stable. BTW, test your mag levels, too(1300-1300). Ooops... sorry Whoyah... I see you got that covered.

    Repto
    There's nowhere else I'ld rather be... unless, of course, you're buying

  8. #8
    dakar - Reefkeeper CR Member
    Join Date
    Sep 2004
    Location
    NOLA
    Posts
    4,336
    First Name
    Dave

    Default

    oops got the effects part flipped around..... thanks Jason.
    Every electronic device is manufactured with smoke stored deep inside... only a true genius can find a way to set it free.

  9. #9
    Reptoreef - Reefkeeper CR Member
    Join Date
    Sep 2004
    Location
    Brigham City, Utah
    Posts
    2,530

    Default

    I thought so... no prob. How about ya, Angie... any more info???
    There's nowhere else I'ld rather be... unless, of course, you're buying

  10. #10
    davejnz - Reefkeeper CR Member
    Join Date
    Sep 2004
    Location
    Daytona Bch,FL
    Posts
    1,446

    Default

    I like to use NSW S.G. 1.026,lots of synthetic salt mixes are low in Magnesium and by mixing full strength,the levels will be higher.Baking soda will slightly lower PH as mentioned by Repto,I use it unbaked 2-3 times a wk.As well as Calcium Chloride to balance the alkalinity provided by baking soda.12ml of liquid calcium(kent) is what is needed to balance out 1 tsp of baking soda.Alkalinity(bicarbonate/carbonate) is the limiting factor in calcification in stoney corals.Many test calcium often and strive to keep it at 420ppm.By monitoring alkalinty depletion,you can pretty much tell where your calcium is at because they are tied together.Once the 2 levels are balanced it becomes much easier to maintain without much testing.I only test calc monthly and its been at 420ppm,i test for alk 2times a week(in my new tank)and by adding a balnced baking soda/CaChl supplement,the levels have been consistent.

Page 1 of 2 1 2 Last

Similar Topics

  1. Salt & Water RO Water Chemistry
    By goodgreef in forum Basics
    Replies: 11
    Last Post: 05-26-2010, 11:47 AM
  2. Flow & Plumbing Water Chemistry
    By 320shallow in forum Hardware
    Replies: 6
    Last Post: 10-15-2009, 12:26 AM
  3. Calcium, Alk, Mg & pH CaC03 sand & water chemistry
    By Thomas Bartkus in forum Chemistry
    Replies: 24
    Last Post: 10-10-2005, 09:35 PM
  4. Calcium, Alk, Mg & pH water chemistry
    By Sea~Horse~Whisperer in forum Chemistry
    Replies: 43
    Last Post: 08-12-2005, 08:48 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

About CaptiveReefs

    If you are interested in learning about reefkeeping or have a problem with your reef, our reefkeeping community is here to help. Feel free to ask a question or search our site. We have lots of experienced reefkeepers that are willing to provide free reefkeeping advice!

    Besides being a great resource for all levels of reef aquarium hobbyists, CaptiveReefs is a social experience that will enhance your enjoyment of reefkeeping. CaptiveReefs is committed to connecting reefkeepers with the support and information they need to grow beautiful coral reef aquariums.

Information

Connect with Us