Okay using a 5.2vDC @ 800ma to drive 10 LED's here's your wiring diagram.
You'll need 1/4W 68 ohm resistors for each LED.
Just for good measure some detailed info
- each 68 ohm resistor dissipates 61.2 mW
- 1/4W resistors are fine for your application
- together, all resistors dissipate 612 mW
- together, the diodes dissipate 990 mW
- total power dissipated by the array is 1602 mW
- the array draws current of 300 mA from the source.