[Timezone Detection]
Create Account - Join in Seconds!

User Name: Email Address:
Human Verification

Please enter the six letters or digits that appear in the image opposite.

DIY Mesh Top to Keep Fish From Jumping


Bookmark and Share
Page 1 of 3 1 2 3 Last
Results 1 to 10 of 21
  1. #1
    jimsflies - Reefkeeper
    Admin/Founder

    Join Date
    Aug 2009
    Location
    Michigan
    Posts
    11,467
    First Name
    Jim

    Default DIY Mesh Top to Keep Fish From Jumping

    Thought I would share the cover I have been using to keep fish from jumping out of my tank. I have been using this mesh for tops for about 3 years and couldn't be happier. I used a glass top for several months, but don't like the glass because it accumulates condesation and salt spray which blocks light. I also had heat issues with the glass top.

    The screen doesn't hold heat at all. After the halide was on all day, it is barely warm to the touch right under the bulb.

    For those of you that use eggcrate, this top is also better because it allows more light to pass than eggcrate. With a metal halide, I got dark corners when I tried eggcrate. The light difference is hardly noticable with the clear mesh screen!

    I have tried both 1/2 inch mesh and 1/4 inch mesh, both work very well. If you have real small fish, then the 1/4 is the way to go and doesn't compromise light intensity.

    Here's photos of the top on the tank.

    screen top1 - DIY Mesh Top to Keep Fish From Jumping

    screen top2 - DIY Mesh Top to Keep Fish From Jumping

  2. #2
    jimsflies - Reefkeeper
    Admin/Founder

    Join Date
    Aug 2009
    Location
    Michigan
    Posts
    11,467
    First Name
    Jim

    Default

    For you DIY reefers, here is how I made the screen mesh top:

    Materials Needed:
    2 - 48" screen aluminum framing material (HD, Lowes, Menards, etc)
    4 - screen frame corners
    1 - roll of spline material
    1 - spline roller
    1 - roll of screening material (see Jimsflies description above)

    photos courtesy of beakerbob...

    Cut the aluminum framing to the interior size of the top of the tank lip (minus 1/16"), insert the corner and snap together:

    frame 1 - DIY Mesh Top to Keep Fish From Jumping

    frame 2 - DIY Mesh Top to Keep Fish From Jumping

    Lay the screening on the framework and, using the splining tool, press the spline into the groove of the frame, starting at one corner and working around:
    frame 3 - DIY Mesh Top to Keep Fish From Jumping

    frame 4 - DIY Mesh Top to Keep Fish From Jumping

    The splining will keep the screen taunt. Trim the excess screen material off the frame:

    frame 5 - DIY Mesh Top to Keep Fish From Jumping

    And you have completed the screened tank top!

    frame 6 - DIY Mesh Top to Keep Fish From Jumping

  3. #3
    ReeferRob - Reefkeeper CR Member
    Join Date
    Sep 2009
    Location
    CORAL CITY U.S.A
    Posts
    3,367
    First Name
    Rob
    Awards Photo of the Month

    Default

    I made one as well with Jims help and direction. Love it over a glass top any day, and a small price to pay to protect your investment (fish) Heres a pic of mine with a sweet hand blown glass marble that looks like a ricordea for a handle.
    I also collect hand blown glass in addition to credit card bills!
    100 3749 - DIY Mesh Top to Keep Fish From Jumping
    "We shouldn't think of an environment where livestock can survive, we should ensure an environment where livestock can thrive."-Rabidgoose
    "If it's gonna be that kinda party, Ima stick my ........ in the mashed potatoes!"-Beastie Boys

  4. #4
    jimsflies - Reefkeeper
    Admin/Founder

    Join Date
    Aug 2009
    Location
    Michigan
    Posts
    11,467
    First Name
    Jim

    Default

    Wow...not that's a cool addition! I want one of those.

  5. #5
    The Rugger - Reefkeeper CR Member
    Join Date
    Dec 2005
    Location
    JAX, FL
    Posts
    439
    Awards Monthly Giveaway Winner

    Default

    I was going to ask you about that Jim. Did you find the mesh at a Norm Hardware store like Lowe's or Home Depot? I have an external over flow on my current tank so I would have to think about some sort of modification. Thanks for sharing.

  6. #6
    jimsflies - Reefkeeper
    Admin/Founder

    Join Date
    Aug 2009
    Location
    Michigan
    Posts
    11,467
    First Name
    Jim

    Default

    No I got it from a store that was going out of business. But I had to buy a ton of it. I've been selling pieces of it to other reefers...most tanks are in the $20-40 range including shipping.

  7. #7
    Rabidgoose - Reefkeeper Moderator

    Join Date
    Sep 2009
    Location
    Thumb MI
    Posts
    2,211
    Awards Yugo Award Photo of the Month

    Default

    I also use the mesh on my tank and highly recommend it.
    I simply can't trust people that don't like bacon,

  8. #8
    jimsflies - Reefkeeper
    Admin/Founder

    Join Date
    Aug 2009
    Location
    Michigan
    Posts
    11,467
    First Name
    Jim

    Default

    The pictures in the DIY thread are a 1/2 inch mesh. I also bought 1/4 inch mesh and now exclusively recommend that instead of the 1/2 inch. Unless all you have are big fish, then I would go with the 1/2 inch because it is a thicker sturdier material. The piece of mesh I am using is the 1/4-inch and it has been in service for several years now...so it is still sturdy, but not as much as the 1/2 would be.

  9. #9
    Rook - Reefkeeper CR Member
    Join Date
    Sep 2009
    Location
    Grosse Pointe Park
    Posts
    199

    Default

    Jim,

    What did you cut the metal with, hacksaw?

    Also, I need to go around the return plumbing. I was thinking of cutting a slit in the metal and the net to go around the plumbing and either (a) hope the tension holds it together, or (b) add a straight connector at the cut that I would have to open if I remove the top. I don't want a large opening on the back. I just know that jawfish will find that opening.

  10. #10
    jimsflies - Reefkeeper
    Admin/Founder

    Join Date
    Aug 2009
    Location
    Michigan
    Posts
    11,467
    First Name
    Jim

    Default

    I use a chop saw, but a hack saw would work fine.

    I don't think what you are proposing will work. The frame needs to be solid all the way around or it will likely fall apart.

    Can you use a narrow piece of plexi across the back and notch out the place for your overflow/return/etc? Then just make the frame so that it goes up to the overflow and over laps the plexiglass a bit. You could dab silicone on the rim stock to secure the plexiglass since it shouldn't have to come off very often.
    Last edited by jimsflies; 09-28-2009 at 05:29 PM.

Page 1 of 3 1 2 3 Last

Similar Topics

  1. Reef Aquarium Fish Pink Spotted Goby Jumping?
    By Ocho Cinco in forum Marine Fish
    Replies: 15
    Last Post: 04-08-2010, 10:17 PM
  2. Clear Mesh for Tank Tops (keeps fish in/heat out)
    By jimsflies in forum Equipment Sales & Trades
    Replies: 4
    Last Post: 03-24-2010, 10:46 PM
  3. Water Treatment Mesh Mod
    By Cash in forum Hardware
    Replies: 12
    Last Post: 03-02-2010, 10:41 PM
  4. Jumping Xenias?
    By AuntKaren in forum Soft Coral
    Replies: 7
    Last Post: 03-25-2007, 09:21 PM
  5. Soft Corals Jumping Xenias?
    By AuntKaren in forum Coral Discussion
    Replies: 7
    Last Post: 03-25-2007, 09:21 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

About CaptiveReefs

    If you are interested in learning about reefkeeping or have a problem with your reef, our reefkeeping community is here to help. Feel free to ask a question or search our site. We have lots of experienced reefkeepers that are willing to provide free reefkeeping advice!

    Besides being a great resource for all levels of reef aquarium hobbyists, CaptiveReefs is a social experience that will enhance your enjoyment of reefkeeping. CaptiveReefs is committed to connecting reefkeepers with the support and information they need to grow beautiful coral reef aquariums.

Information

Connect with Us