[Timezone Detection]
Create Account - Join in Seconds!

User Name: Email Address:
Human Verification

Please enter the six letters or digits that appear in the image opposite.

PAR results from jimsflies mesh


Bookmark and Share
Results 1 to 9 of 9
  1. #1
    jimsflies - Reefkeeper
    Admin/Founder

    Join Date
    Aug 2009
    Location
    Michigan
    Posts
    11,467
    First Name
    Jim

    Lightbulb PAR results from jimsflies mesh

    I've been playing with an apogee par meter and thought I would post the results of how the mesh tops compare to other popular alternatives.

    In these results, I am running a double ended 14k coralife 150 watt bulb. The sensor is approximately 4-inches directly below the bulb. Pumps are turned off to stabilize the reading and give a "best case" scenario. Here are the measurements (units are umol m-2 s-1).

    no top 345
    mesh top 327 (6.3% reduction)
    clean glass top 305 (12.6% reduction)
    egg crate 265 (23.2% reduction)

    One thing to note is that the glass top is perfectly clean no...no salt creep...no condensate so that's a best case scenario. All measurements were taken directly below the bulb, meaning that with the eggcrate the light drastically is cut down once you move off center. (Maybe I will post some linear results using just eggcrate soon so the offset can be quantified.)

    I'm switching out the coralife bulb tonight for an xm 20k. So for the heck of it, I will take some comparison reading with a different bulb.

  2. #2
    Bella127 - Reefkeeper CR Member
    Join Date
    Nov 2009
    Location
    Roseville,MI
    Posts
    419
    First Name
    Pete
    Awards Fantasy Football Champion - 2012 Fantasy Football League Champ Photo of the Month Tank of the Month

    Default

    Good info Jim, I need to get some more mesh from you . My last mesh top became brittle and fell apart in the middle.I believe it was from my metal halide beating on it for 6 hours a day for 18 months

  3. #3
    jimsflies - Reefkeeper
    Admin/Founder

    Join Date
    Aug 2009
    Location
    Michigan
    Posts
    11,467
    First Name
    Jim

    Default

    The one downside to the mesh is it doesn't last forever like the other options. I got about 3 years out mine and had to replace it. But it is cheaper than almost any saltwater fish on the floor.

  4. #4
    Sir Patrick - Reefkeeper A2 Club Coordinator
    Join Date
    Oct 2009
    Location
    UofM territory
    Posts
    7,838
    First Name
    Chris
    Awards Monthly Giveaway Winner

    Default

    Thx for the info!! Very interesting....I would have guessed the glass to be better par- happy to see that I would have been wrong. Always had a hard time keeping the glass clean on top!

  5. #5
    jimsflies - Reefkeeper
    Admin/Founder

    Join Date
    Aug 2009
    Location
    Michigan
    Posts
    11,467
    First Name
    Jim

    Default

    Dirty glass could easily be worse than eggcrate.

  6. #6
    CR Member
    Join Date
    May 2010
    Location
    Detroit
    Posts
    4

    Default PAR results from jimsflies mesh

    Thanks for the info.

  7. #7
    igot2gats - Reefkeeper CR Member
    Join Date
    Sep 2009
    Location
    Grand Rapids
    Posts
    556
    First Name
    Jeff

    Default

    I agree with Chris....surprised about the numbers for glass.

    Very interesting info, Jim.

  8. #8
    tazzy695 - Reefkeeper CR Member
    Join Date
    Sep 2009
    Location
    flint, mi
    Posts
    1,472

    Default

    i was half expecting the numbers for glass to be lower then the egg crate since it is directly below the bulb
    I have been reefing from 08-2007 till 5-2011

    reef tanks are like wifes you have to give them some attention every now and then

  9. #9
    jimsflies - Reefkeeper
    Admin/Founder

    Join Date
    Aug 2009
    Location
    Michigan
    Posts
    11,467
    First Name
    Jim

    Default

    I installed the new XM 20k bulb the night before last. I like the color but the the PAR is underwhelming. I didn't measure with the tops on yet, but no top same spot the coralife 14k was giving 345, I was measuring 160 with the new bulb.

Similar Topics

  1. DIY Mesh Top to Keep Fish From Jumping
    By jimsflies in forum DIY Projects & Plans
    Replies: 20
    Last Post: 01-23-2017, 10:34 AM
  2. Lighting Heidi's Mesh Hex Top
    By jimsflies in forum Hardware
    Replies: 2
    Last Post: 02-19-2011, 10:38 PM
  3. Nano Reef 29 Biocube Mesh Top Project
    By jimsflies in forum Hardware
    Replies: 7
    Last Post: 05-10-2010, 11:17 PM
  4. Water Treatment Mesh Mod
    By Cash in forum Hardware
    Replies: 12
    Last Post: 03-02-2010, 10:41 PM
  5. DIY Mesh Wheel Mod for Skimmers
    By JustDavidP in forum DIY Projects & Plans
    Replies: 2
    Last Post: 02-15-2007, 08:02 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

About CaptiveReefs

    If you are interested in learning about reefkeeping or have a problem with your reef, our reefkeeping community is here to help. Feel free to ask a question or search our site. We have lots of experienced reefkeepers that are willing to provide free reefkeeping advice!

    Besides being a great resource for all levels of reef aquarium hobbyists, CaptiveReefs is a social experience that will enhance your enjoyment of reefkeeping. CaptiveReefs is committed to connecting reefkeepers with the support and information they need to grow beautiful coral reef aquariums.

Information

Connect with Us