DIY Hang-on Refuge

[flame]

Here is my latest project. Fill free to ask any questions or comments welcome.










The unit is on the back of the tank and 1 inch from the wall operational pictures is almost impossible.

Later

[dakar]

Looks great! couple of Q's

What are you using to feed water in and from where (sump?)

What are the actual demensions that you used?

Is the last pic distorted from the angle it was taken from or is there really that much deflection on the front and back?

Looks like a lot of thought went into it, and it shows, quite the job there!

[flame]

Originally Posted by dakar

Looks great! couple of Q's

What are you using to feed water in and from where (sump?)

What are the actual demensions that you used?

Is the last pic distorted from the angle it was taken from or is there really that much deflection on the front and back?

Looks like a lot of thought went into it, and it shows, quite the job there!

I had a canister filter that I was not using. I took everything out it and use the intake in the display then the return in the refuge.

Dimension 30 long 4 wide and 12 deep

There is that much deflection. I will need to install another brace and will post pics when completed.

Thanks
Dakar

[Dirt4dinner]

Flame,
I see in your background there a whole lot of tools that I don't have. Any interest in creating another one of these hang on's for me? I would like to add one to my tank down the road. Let me know if your interested. -Dirt4dinner

[graphixx]

Ron, that is one **** of a job!!!! your are the acrylic GURU

[perpetual98]

Me thinks I should sell these on my site. *wink*

[segraves1]

#ed_op#DIV#ed_cl#wow....I'm reading all kind of cool stuff today........been wanting to build one of these for a while.......... #ed_op#IMG src="http://www.captivereefing.com/richedit/smileys/Happy/2.gif"#ed_cl##ed_op#/DIV#ed_cl#