Euroreef RC750 clone DIY

[PurpleAardvark]

I am going to try and make one of the Euroreef RC750 http://www.euro-reef.com/rc750specs.shtml

I know that from the base of the chamber is 26" and it is a 12" tube I just can't figure out the neck and the collection cup. If any one has the messurements or any Ideas I would love the help.

[dakar]

Bending acrylic to the cone shape isn't too difficult, might take a couple of practice runs with the oven to heat it and form it just right, the rest looks pretty straight forward. The collection cup and such you can get away just about anything... heck make it square if that's easier for you.

Should be a good hack just the same