Hey all,
I have a 125 gallon aquarium, canopy, and stand for sale, it is drilled for 2 overflows and 2 returns.....Just needs someone who needs it. It has scratches inside that disappear when full. Light Oak wood grain tank and stand. Dims are 72'' long, 18'' wide, and 23'' deep. Also has a canopy with 2 icecap balasts and 4- 72'' bulbs...and it works. Not VHO or T5 but regular type bulbs (has 4 Blue and 2 full spectrum in it)
Let me know if you have any questions.
The set up is sold. Thank you all for the interest!
Last edited by ebushrow; 02-09-2012 at 08:30 PM.
Reason: Sold
thanks for the pics....those bulkheads look kinda low... where was the water lever at when it was running...when would it be available for pickup if i can get it?
Hi
The bulk head fittings are about 6 inches down from the very top of the plastic rim to the middle of the bulkhead. The design was to use 90 degree elbows and strainers at the top of the elbow or extension pipe...that is when I was designing it).
Thanks
Eric
---------- Post added at 11:55 PM ---------- Previous post was at 11:54 PM ----------
Hi
The bulk head fittings are about 6 inches down from the very top of the plastic rim to the middle of the bulkhead. The design was to use 90 degree elbows and strainers at the top of the elbow or extension pipe...that is when I was designing it). I will be home after 6pm the rest of the week and I will be around both Saturday and Sunday.