Anyone using an Apex to control (dim) their LEDs? What do I need...is there a certain cable? The drivers are MeanWell ELN-60-48D if it makes any difference. Any example programs or tips for getting it setup would be appreciated.
I thought I could do it with the Apex right out of the box.
However, I see that Apex has a VDM Module for controlling LEDs. Not sure if I need that or not? I don't think I care about lightning storms and cloud cover. However, I would like to be able to simulate sunrise/sunset and lunar cycles though.
Jim,I'm useing my apex with a vdm to control and dim the AI SOL LED's. Personally it s@#ks and you need a phd to figure it out.Lots of virtual programs.Hate to say it but R/C has a bunch of examples on how to program it and set it up.You do need their cable also.If it will help I can send you my web link and you can look at what I did
Good luck!! If you need one aqua cave has good prices.LMK if you need a peak.Personaly I'd see if AI's would work.Very easy to change and to set up unless you enjoy day's of frustration and the ocasional ranting,It's really that big of a PITA.I wouldn't recomend talking to apex either unless you enjoy yelling at people on the phone and screaming WTH or worst--customer service is not their strong point. lol
Just looked at the link you posted,hence that is where my hatred of the apex began
unless you enjoy day's of frustration and the occasional ranting,It's really that big of a PITA.I wouldn't recommend talking to apex either unless
I am used to self inflicted aggravation...I started a reef forum after all.
I haven't had too bad of luck with Neptune's customer service. At least you get to talk to someone and I seem to get resolution when I have had problems. They are a little short on personality but I don't blame them...for the most part they probably have to walk non-technical people through the same problems (e.g., how to connect the controller to a router) all day long.
It could be worse....
[ame=http://www.youtube.com/watch?v=-Lzz8KER520&feature=related]‪Discover Card - Peggy Customer Service #2‬‏ - YouTube[/ame]
I am used to self inflicted aggravation...I started a reef forum after all.
I haven't had too bad of luck with Neptune's customer service. At least you get to talk to someone and I seem to get resolution when I have had problems. They are a little short on personality but I don't blame them...for the most part they probably have to walk non-technical people through the same problems (e.g., how to connect the controller to a router) all day long.
It could be worse.... 𠊭iscover Card - Peggy Customer Service #2‬‏ - YouTube
Oh man Peggy left neptune lol Know what are we going to do.
Jim,I'm useing my apex with a vdm to control and dim the AI SOL LED's. Personally it s@#ks and you need a phd to figure it out.Lots of virtual programs.Hate to say it but R/C has a bunch of examples on how to program it and set it up.You do need their cable also.If it will help I can send you my web link and you can look at what I did
Are you able to also manually control the LEDs using the controller (e.g., aquanotes or via web)?
Are you able to also manually control the LEDs using the controller (e.g., aquanotes or via web)?
yes you can adjust the light levels useing the laptop or my phone.You'll have to program virtual programs for sunrise,sunset, blue control,white control,and storm if you want it then program ramps and intesity levels too.It is these ramp times and intensity levels that you use to adjust the percentage of the light power.Make sense?? Like I said,get into mine and copy what you need.