Tunze in trouble?

Well gee, since you can turn down a vortech or tunze to suit your taste, I would say it's much worse to overstate numbers than to understate numbers. I would much rather companies underestimate/understate any kind of parameter. Theres no way any kind of suit should be brought without quite a bit more testing. But, I suppose none of these companies should state any kind of figures if they are only estimates. They should just make a tank size recommendation (which is completely subjective). I see tons of people recommend 2 x mp40 for 90g tanks, which in my subjective opinion is complete overkill. I run one mp40 and an mp10 in a 180g and sps and everything else are just fine with that flow, but again just a subjective opinion.

lawsuit is ridiculous for something like this, the bad publicity will be enough to hurt them a bit. They do make a solid product and people have been very happy with it over the years so there's still something to be said for them.

Quote:

---

Originally Posted by rmalone

Well gee, since you can turn down a vortech or tunze to suit your taste, I would say it's much worse to overstate numbers than to understate numbers. I would much rather companies underestimate/understate any kind of parameter. Theres no way any kind of suit should be brought without quite a bit more testing. But, I suppose none of these companies should state any kind of figures if they are only estimates. They should just make a tank size recommendation (which is completely subjective). I see tons of people recommend 2 x mp40 for 90g tanks, which in my subjective opinion is complete overkill. I run one mp40 and an mp10 in a 180g and sps and everything else are just fine with that flow, but again just a subjective opinion.

---

I agree. But I recall quite a few people who bought an MP20 or 40 only to discover it was too much for their tank. So, they sold the bigger pump for a loss and then had to buy a smaller unit. That could be construed as false advertising and double dipping on the part of vortech. If that happened to me I'd be Pi$$ed. Also there are Tunze models that can be turned down.

I'm really not trying to say anything bad about vortech. Just that inaccurate numbers are inaccurate numbers.

In the spirit of full disclosure... I have only owned Tunze pumps (both purchased used) and would not shy away from buyinh a vortech (if I could afford one :redneck:).

Tom

Wait a minute, you can turn a vortech down as far as you want. An mp40 can run as low as mp10 if you want it to. I have an mp10, only trouble with the mp10 in a large tank is that the magnets are just barely capable of dealing with a 180g glass thickness. The mp40, will move a crap ton of water, but only if you want it to. I'm curious as to who is buying the mp60? Overall, given the adjustment range of vortechs, money is the only good reason not to own one.

I'm guessing most people that bought an mp40 for a 40g breeder, got mad when they realized their pump cost more than all their other hardware put together.

and me with just 2 lil Korilia 250's...I'm ashamed :silly:

Quote:

---

Originally Posted by MizTanks

and me with just 2 lil Korilia 250's...I'm ashamed :silly:

---

Don't sweat it. I have a Koralia that has been bulletproof (minus the broken ceramic impeller shaft, which hydor replaced with a steel one at no charge). My only beef with it is the inability to point it in any direction.

Tom

Quote:

---

Originally Posted by Tom@HaslettMI

But I recall quite a few people who bought an MP20 or 40 only to discover it was too much for their tank. So, they sold the bigger pump for a loss and then had to buy a smaller unit. That could be construed as false advertising and double dipping on the part of vortech.

---

Could be construed as such, yes, but not justifiably so I think. Frankly, such scenarios are IMO more likely cases of the combination of lack of due diligence (research) on the buyers part and the all-too-common American affliction/compulsion with correlating bigger/faster/more powerful as always being better.

I agree, though with fish tanks, guns, trucks, boats, bank accounts, and a couple dozen other things, bigger, faster, and more powerful really IS better. Obviously I'm joking, I highly doubt the vortechs are underrated by a huge margin (that which would render them useless in anything over 40g). Ive had an mp10 in a 12g nano and it was great. Again, when the vortechs came out people with small, sub 30g tanks, were putting $400 pumps in $200 tanks, cranking them to full and wondering why water was leaving the tank. Hence the reason there are now mp20s and mp10s. Apparently, some people thought the mp40 was not enough, hence the mp60.

Forever and always people have been clamoring for bigger, faster more powerful pumps and vortech gave it to them. Now they are guilty of being too powerful? Really? Just turn the darn thing down a little and you wont sand blast the inside of your tank. Given the adjustability, bigger is WAY better than smaller in this instance, particularly if a certain bigness has been claimed and not delivered on.

Alas, I fear the worst. I have confronted my Tunzes' about this quandary, told them that I have watched them for years make the polyps dance in my tank and laughed at the tangs struggles to swim directly across the flow in an effort to get from here to there. I informed them of the accusations that have been leveled against them and I asked point blank, how are you giving the illusion of water movement? Is it with some hidden mirrors? Are the other members of the tank in cahoots with you? I waited....and waited.....no answer, and then....cavitation..a burst of bubbles and the pump was done. Only to start again as if to say, shut your pie hole, this is what I do and I've done it for you for a lot of years. You've never had to take me to the shop, i've never been any trouble. But you get rabbit ears when you hear a bunch of haters! Wow...my bad...their's a guy a few posts south that has one of your cousins and claims he can't get it to work at all. I'll ask Andy and maybe he will sell it to me for the price of transportation seeing as how it doesn't do anything. $20 should do it

chuck

Very nice Chuck! I would feel guilty selling it to you though. The weakest prop pump I have ever encountered.

Quote:

---

Originally Posted by Rabidgoose

Alas, I fear the worst. I have confronted my Tunzes' about this quandary, told them that I have watched them for years make the polyps dance in my tank and laughed at the tangs struggles to swim directly across the flow in an effort to get from here to there. I informed them of the accusations that have been leveled against them and I asked point blank, how are you giving the illusion of water movement? Is it with some hidden mirrors? Are the other members of the tank in cahoots with you? I waited....and waited.....no answer, and then....cavitation..a burst of bubbles and the pump was done. Only to start again as if to say, shut your pie hole, this is what I do and I've done it for you for a lot of years. You've never had to take me to the shop, i've never been any trouble. But you get rabbit ears when you hear a bunch of haters! Wow...my bad...their's a guy a few posts south that has one of your cousins and claims he can't get it to work at all. I'll ask Andy and maybe he will sell it to me for the price of transportation seeing as how it doesn't do anything. $20 should do it

chuck

---