Heres the readers digest version of my Custom one off tank set up.. It my dinner table we eat all our meals at the tank.. Party around the tank. Drink beers and BS around the tank..
the bottom of the stand
the top
the under belly [hr] So if you cant guess by now the stand is big!!
sorry some of the pics are out of order. but you get the idea.. so here it is after , doors, corbles, DJ strip, paint, and poly on the bar top, then slid in place with the 29 in place.(temp hood)
so here is the shiny new tank being put in place it is 60"x24"x20" tall with a coast to coast overflow in the back [hr] and dont forget the can lights i Installed an so we have the plumbing issue
so what I have going is a 3600GPH Closed loop pump (reefflo dart) 2x K4's on sea swirls one front one back (only one in the back now) A 800 GPH return pump. ATO going trough a kalk reactor. 2x 250w MH coralvue 14k's on Hamilton Electronic ballasts and LUMENBRIGHT reflectors 2x 86w T-5's on ICECAP 660 SWC250 Skimmer dual 200w heaters PH monitor 2x DJ strip's
On the 29 1x250w MH coral vue 20K on coralvue ballast 500 GPH return pump 1 K-4 1 K-1 Euroreef 135 skimmer ATO I had a buddy make a 3 piece hood for the tanks [hr] ooops the water and rock shots
O.K. lights one for the first time.... I was running 2oK mh's but switched to 14K's NOW YOU CAN SEE THE END RESULT. 8 matching bar stools Just add pizza and kids..
heres a few eye candy for ya!! [hr] BTW these pics are taken with a CANON DSLR XSi w stock 18-55mm lens Shot in manual mode on a tripod (some of them) and the two second timer. my lighting is 2x 250w 14K MH 2x 86w T-5 act... Aqua blue + most are at ISO 100 F-stop 5.6-22 Depending on how much coral I want in focus! Shutter speed 1/4-1/20
Member's Reefs 
A one of a kind 125 project 
Previous Thread
Next Thread
Linear Mode
