Not yet but I will. A bunch of that metal was in the bottom of my sump. Not good.
Just a suggestion ,this of course is my doaseing tubes but did the same for my Apex Ph and temp probes. Removes easily with a pocket knife. I used 1/2 inch polycarbonate and drilled and taped 1/4 x20 threads and used nylon bolts. Just finger snug will hold probes in place. Made one for a friend that we glued to the wall with two part epoxy that I drilled holes just big enough for the probes to fit in without screws.if you go without screws use 1" material. Either way works well and no rust . Sorry no picture of the probe holder. If you need one LMK . Works been nuts so it may take awhile.
Just a suggestion ,this of course is my doaseing tubes but did the same for my Apex Ph and temp probes. Removes easily with a pocket knife. I used 1/2 inch polycarbonate and drilled and taped 1/4 x20 threads and used nylon bolts. Just finger snug will hold probes in place. Made one for a friend that we glued to the wall with two part epoxy that I drilled holes just big enough for the probes to fit in without screws.if you go without screws use 1" material. Either way works well and no rust . Sorry no picture of the probe holder. If you need one LMK . Works been nuts so it may take awhile.
Nice I really like that! I'm not happy with my dosing hoses either. Maybe I'll do this for both my Probes and Dosing Hoses. Thank you!