Got Foam?

[goodgreef]

Good morn'n all,

I noticed this morning that I had some foam on top of the water near the glass. I can't recall seeing it before. Any thoughts?


Thanks,

goodgreef

[Tom@HaslettMI]

Do you have a sump? If so, it could be poor surface skimming. Meaning a portion of the surface water is blocked off from getting pulled into the overflow. An oily residue on the surface is a sure sign of this. If your return pump sucked a little air in then foam could accumulate there as well. Usually changing the direction or adding additional surface flow/agitation will correct it. Pics of the foam and a top down shot (of your aquarium, not you) with all pumps running could be helpful.

[jimsflies]

Do you skim off your surface... with an overflow?

Any chance your skimmer went nuts with micro bubbles?

BTW- When you get a chance fill out a reef showcase (Navbar-->Reef Tools -->Add/Edit Reef Info) that way we can see what all you have going with your tank without asking. Plus it's just cool... :)

[jimsflies]

a top down shot (of your aquarium, not you)

:duh:..........

[goodgreef]

Thanks for all of the good info. I checked and think it was a skimmer issue. I have a SeaClone 100 and really not sure when I have it set right. I understand most protein skimmers are difficult....for newbies!!

I'll be sure to get my tank info and photos up for future reference. Can't do it today though.

Sure is a good feeling to know you're out there! Thanks again.


goodgreef