Nitrates and Phosban Reactors w/ Carbon.

the lil sps growth is because your levels are off alk/calc and nitrates.

The directions are kind of vague willing to help me out on how much I should use? Says to start doseing 1ml per 4 gallons of water capacity. How much should I add if I only want to bring up the levels 40mg/l- 80mg/l?

Quote:

---

Originally Posted by steveperry98

The directions are kind of vague willing to help me out on how much I should use? Says Says to start doseing 1ml per 4 gallons of water capacity. How much should I add if I only want to bring up the levels 40mg/l?

---

does it say how much it raises it?

1ml per gallon will raise alkalinity by 0.74maq/liter (2.07dKH)

Quote:

---

Originally Posted by steveperry98

1ml per gallon will raise alkalinity by 0.74maq/liter (2.07dKH)

---

do 30ml. you wanna raise it slowly.

Should I do that tonight or in the early morning before the lights come on, while levels are lower?

Quote:

---

Originally Posted by steveperry98

Should I do that tonight or in the early morning before the lights come one while levels are lower?

---

PH jumps when you add it. I add mine whenever lol. I dont think it really matters.

the way to figure out how much to dose take ur total water volume you think you have and devide it by 4, the number you get is how many mL to dose.

140/4= 35. So 35 ml to start with?

Quote:

---

Originally Posted by steveperry98

140/4= 35. So 35 ml to start with?

---

yea, go with that than wait a few hours and test and see where your at.

Alright that's what I'll do. Thanks so much!