I'm drawing up a plan for LR. Shaping and placement.
What do y'all use to connect the pieces? How?
Connecting LR
I'm drawing up a plan for LR. Shaping and placement.
What do y'all use to connect the pieces? How?
CR Member
Most LFS's and online vendors sell a 2 part reef safe epoxy for about $12 bucks. Or you can go to Home Depot and look for Harvey's 2 part for $5 bucks, same exact stuff! The trick is to mix it kneed it until it gets warm then you have to put it in place before it turns hard.
"We shouldn't think of an environment where livestock can survive, we should ensure an environment where livestock can thrive."-Rabidgoose
"If it's gonna be that kinda party, Ima stick my ........ in the mashed potatoes!"-Beastie Boys
What rob said
Also acrylic rods, small pieces of PVC combined with zip ties work wonders.
CR Member
I've also used the bottom portion of plastic hangers. Cut out the straight section, drill a appropriately sized hole with a masonry bit, place the hanger section in the hole, cut to desired length and add the next rock.
I collect PEs, and I'm always looking to trade for ones I don't have yet.
There's nothing like being a Reefer!
Reply With Quote
