Finally picked up my 55 gl tank and cabinet today at the LFS(which isn't very local).Had to wait a long time for it to come in.The bad news is that the cabinet is very narrow inside do to the center supports at 10 1/4".My plans of a 20 gl tall tank for a sump are now finished as it's to wide.There's nothing other than custom that will be long enough for my design for a skimmer chamber on one side with my Euro Reef CS-5 skimmer and a foot print of 9"x9".my mag 9.5 in the center which is 3" wide and on the other end a refugium.A 15gl tall might fit in there but it's kind of short at 20" long, with baffles would leave little for a refugium.The guy at the LFS gave me some crap for going with a mag 9.5, said it was to big for a 55 gl.My plans are to have it tee'd off with a ball valve feeding back to the sump to throttle it back if need be. I'm going to be using a SCWD with it so I went with a larger pump to compensate for the flow loss using the SCWD.If anyone has any idea's for a sump that would fit I'd appreciate it.
Thanks Rick