I did not silicone my bulkheads, but I didnt have any chips.
I would wait to hear from someone with experience w/ a chipped hole, just in case. I would think it could make a difference, but unsure.
Thanks, Chris.
Originally Posted by schminksbro
I wouldn't silicone. The gasket should seal just fine as long as the chip doesn't exceed the outside edge.
The chips are not outside the perimeter of the bulkhead gasket. I assumed they would be fine. I plan to use a little silicone grease when assembling. Keeping my fingers crossed I guess. If it does leak, should I silicone them in?
Originally Posted by Sir Patrick
Reply With Quote
