90 gallon complete plus some

[Jacobnunley]

Type: For Sale

State: Michigan

Will Ship: No

Category: System

Condition: Used

Tank
•90 gallon acrylic clarity plus
•restored by Blue fish aquarium-No scratches
•Built in overflow

Stand
•Acrylic

Canopy
•Acrylic

Lighting
• Ice Cap LED tube 46"
•6x54W Tek 2 Retrofit lighting
•all new bulbs
•3 ATI 50/50
•3 Giesemann
http://www.reefgeek.com/lighting/T5_...unlight_Supply

Sump

I had this custom built by Innovative Plastics Inc to fit in the bottom of the stand, it has never been used.

• 22x14x13
• Acrylic

Refugium
custom acrylic aquarium (never used) made by Innovative Plastics Inc. this tank is drilled with a side overflow ...

• Drilled 1.5 drain with bulkhead
• Drilled .5 input with bulkhead
• Acrylic
• 18x13x20

Refugium Cabinet
custom made cabinet that has 5 digital timers and on/off switches for power outlets so you can selectively turn off items. The 3 inside lights (for the fuge) are on a timer as well. Stand is made out of maple.

Powerheads
2 maxi jet 1200s
1 SEIO M820

Skimmer
ASM G3

Sand
Guessing around 80lbs of Aragonite Sand
5 gallon bucket of live sand -was gave to me -free with tank


plus other Plumbing parts - Bulkheads and such

Fulltankshots - nunley's Photos
fuge - nunley's Photos
Sump - nunley's Photos
FugeStand - nunley's Photos

http://nunley.smugmug.com/Other/Fuge...96007043_fqTPj
http://nunley.smugmug.com/Other/Full...98317996_NdWPx
http://nunley.smugmug.com/Other/fuge...95933385_VmHx2
http://nunley.smugmug.com/Other/SUmp...95930231_RkBaS

Asking $900 --I have over $1750 into this.

Thanks

[jimsflies]

I'm assuming you are trying to copy and paste from somewhere (that likely originated with ms word)? vbulletin has a bug with symbols such as quotes and apostrophes that cause it to truncate the post when you submit it. The best way to strip the MS junk out of the post is to paste into an email and mail it to yourself as "plain text". Then copy and paste back here on CR. If you only have a couple quotes and apostrophes, you can just delete and retype them in your post...that seems to work too.

[Jacobnunley]

I'm assuming you are trying to copy and paste from somewhere (that likely originated with ms word)? vbulletin has a bug with symbols such as quotes and apostrophes that cause it to truncate the post when you submit it. The best way to strip the MS junk out of the post is to paste into an email and mail it to yourself as "plain text". Then copy and paste back here on CR. If you only have a couple quotes and apostrophes, you can just delete and retype them in your post...that seems to work too.

Thank you sir!