APEX codes and STUFF

[Rabidgoose]

I've started playing with the alarms on the Apex and I'll swing in here with code questions from time to time. This stuff is, for the most part beyond me. Here is what I have for an email alert for tank temps.....does it look like it will work. Tank parameters on 2 tanks.....

SndWrn_17(V)
Set OFF
If Temp < 76 Then ON
If Temp > 83 Then ON
If Tmpx5 < 75 Then ON
If Tmpx5 > 81 Then ON

EmailAlm_15
Set OFF
If Outlet SndWrn_17(V) = ON Then ON


The "(V)" signifies a Virtual Outlet

I can probably test this on my own messing with it but that would take quite a bit of time for me as well. I'm still not sure my email is set up right either.... Just looking to avoid any obvious errors before I go any further. Post your codes in here too if you want...I am pretty good with the C/P.

[CalmSeasQuest]

Looks like a good start - For reference, here's what I use for email (and text alert) alarm triggers on my Apex...

Set OFF
If pH > 08.65 Then ON
If pH < 07.90 Then ON
If Cond < 34.2 Then ON
If Cond > 35.5 Then ON
If ORP < 200 Then ON
If Temp < 78.2 Then ON
If Temp > 81.0 Then ON

I use the above to alert and control ATO, 2-part and Kalk dosing. (COND = Salinity)