BioCube Mods

[DBarsotti]

If you've done some modifications to your BioCube post them here!

I was looking through my pictures and found these and thought i'd share, maybe help give people ideas for some sweet mods.

Mybiocube 29g

Add a float valve for freshwater ATO


And also Cut the top hood to add a AquaC Ramora Skimmer. I made it so the door would still open and close.

[adalius]

No pictures, but I've done the NanoTuners 4.36 upgrade to the hood, removed the wall between chambers 1 & 2, and put a hole in the false floor of chamber 1 to fit a heater.

[MizTanks]

No pictures, but I've done the NanoTuners 4.36 upgrade to the hood, removed the wall between chambers 1 & 2, and put a hole in the false floor of chamber 1 to fit a heater.

Why remove the wall between 1&2?

[adalius]

Why remove the wall between 1&2?

Increases the flow to chamber 2, which increases the flow to the pump. I was having issues with it going from maximum to minimum (and spewing bubbles) in the span of a day, so rather than topping off every single day I just chopped that open a little more.

[MizTanks]

Added a media basket to 2nd chamber-upgraded pump to MJ606=165gph+hydroflow. Mines an 8g so nothing drastic. But I would love the nanotuners mod hood!

[adalius]

Ah, yea, I added a hydorflow to mine too. And mines a 29g

[DBarsotti]

Need more pictures!

[MizTanks]

Gotch ya! Good idea!

[StevieT]

You probably figured this out but it isn't the "wall" just the tab

[ame="http://www.youtube.com/watch?v=8Rpr4asbIL8"]YouTube- BioCube - Removing tab adding extra flow[/ame]

[adalius]

Exactly what I meant, but yep, just the tab. And glad to see you joined Steve!