Broken Koralia impeller shaft

[Rabidgoose]

I'd try Pruess....if they don't have them they can probably put you in touch with one.

[Tom@HaslettMI]

I'd try Pruess....if they don't have them they can probably put you in touch with one.

That is likely what I'll do. I was just wondering if there were other options since they tend to be $$$.

how close to an end did it break?

About 2/3 of the way down from the front.

i think thats what happened to my koralia 2 too i looked at it the other day and the propeller wasnt spinning

Mine was still spinning but the magnet on the impeller was not fully seated and there was no flow being produced by the powerhead. If the impeller wasn't spinning I'd venture to guess that the magnet and/or housing is dirty and needs to be cleaned.