CR Member
Weld-on
Hey guys,
Looking to put together my overflow for the 60 this week, going to buy the acrylic tomorrow and I was just wondering where I could find some Weld-on #4 for sale? I can't seem to find it on home depot or Lowe's website. Let me know where you have purchased yours in the past. Thanks!
"You're gonna need a bigger boat..."-Roy Scheider as "Chief Brody" in "Jaws"
Ask 10 Reefers a question and you'll get 12 opinions in return.
---ETBReefer05
CR Member
Theres a place in Madison Heights, The guys name is Ron. Im sure someone will chime in.
CR Member
Soroc Plastics on Dort near Hill sell most of the weld on products. Look for the big brown water tower they're right by it.
CR Member
Thanks Jamie! I had been there before and had to get some acrylic from there anyway so I went there today got Some #3, they were out of #4 and I need to finish this overflow before next wednesday. Hopefully this stuff won't set too quickly...
"You're gonna need a bigger boat..."-Roy Scheider as "Chief Brody" in "Jaws"
Ask 10 Reefers a question and you'll get 12 opinions in return.
---ETBReefer05
Moderator
# will set very quickly. You can use it but you will have less than 30 seconds working time.
Originally Posted by ETBReefer05
CR Member
What I planned on doing was mocking up the acrylic with clamps and 2x4s then using the weld-on...the box will cure for 24 hours, then I will silicone it into the tank.
"You're gonna need a bigger boat..."-Roy Scheider as "Chief Brody" in "Jaws"
Ask 10 Reefers a question and you'll get 12 opinions in return.
---ETBReefer05
Reply With Quote
