I purchased a Rapid Led solderless coralife biocube dimmable retrofit kit. I got it with 2 of the Mean Well ELN-60-48D drivers and the 3 color dimming kit. On one driver i plan on running 10 royal blue and 2 blue and on the other there will be 8 cool white, 2 uv, 1 red and one green. I know on the blue driver I can only set it to a max of 1000mA since that is the max of the blue leds and on the white driver I can only set it to a max of 700mA since that is the max of the red and UV leds. So my question is when these are first set up do I set them to their maxes (1000 & 700) and use the manual dimming controls to adjust the intensity or do I set them lower and slower work them up?? If I need to set them lower what would be a good starting point????<br/>