Seaclone on Nano-cube Deluxe

[DaRkAnGeLs7]

Okay so this may be reaching out a little...buttt....Is there any way to run a hang on skimmer (maybe a seaclone 150) with that Nano-cube deluxe system? Hmm give me your thoughts everyone.

[jojo22]

If you airstone mod it it might be ok if not they don't work well. TRUST me I have the 100.

[DaRkAnGeLs7]

I wasn't asking if that skimmer was any good but if you could use one on the nano-cube. I just listed that skimmer for an example.

[jojo22]

If the tank is high enough and you are somewhat of a DIY'er I don't see why not

[Sea~Horse~Whisperer]

I have a seaclone 100 on my JBJ 12g nano (actually 8.6 gallons). It's about all I would use it for. In the nano there 2 clowns and 1 carpet anemone. There is also 10lbs rock 2" sand, and a cleanup crew. That's all. It does fit on the nano without any mods. I cut out 2 of the teeth from the OF section so the output of the skimmer is in the back filteration part and the pump on the skimmer draws from the main tank. This way any micro bubbles have to go thru the 3 chambers in the back and the chaeto that is in the center one before returning to the tank. Obviously my seaclone is on the side of my nano. I hope that helps.

Angie

[DaRkAnGeLs7]

Yeah that helps a lot actually, thank you! I just don't see how the basic three stage filtration could do the job.

[Sea~Horse~Whisperer]

Here are some pics to help you. I hope that helps you.

Angie

[Sea~Horse~Whisperer]

oops, I guess I should have cleaned the glass first. shhh don't look at the dirty glass.