[Timezone Detection]
Create Account - Join in Seconds!

User Name: Email Address:
Human Verification

Please enter the six letters or digits that appear in the image opposite.

Switching from T5 to Metal Halide


Bookmark and Share
Results 1 to 5 of 5
  1. #1
    CR Member
    Join Date
    Apr 2014
    Location
    Downriver, MI
    Posts
    12
    First Name
    Angela

    Question Switching from T5 to Metal Halide

    Among the other issues I've been having with my tank, yesterday half of my T5's stopped working on a 4 bulb fixture. I had hoped it was just a burned bulb (does that even happen??) and switched out all four bulbs with no change.

    I dusted off an old 250w metal halide I've had as a backup. The bulb had been used 1-2 months before taking it offline. I know I've forgotten everything I thought I knew about metal halide so I need a fast refresher course.

    I've lowered the time the lights will be on from 5 to 4 hours. Do I need to shorten it more, and ramp up to 5 or 6 hours, or is this okay? I'm trying to avoid bleaching or stressing the corals any more then they already are.

    I really prefer the blues I get from T5's and would like to find a decent replacement 4 bulb T5 fixture. Any suggestions on that are appreciated, too.

    TIA

  2. #2
    AZDesertRat - Reefkeeper
    Subject Matter Expert
    Water Treatment

    Join Date
    May 2010
    Location
    Phoenix AZ
    Posts
    376

    Default

    Raise the MH fixture if possible to gain distance between the light source and corals. If that is not possible cut some pieces of window screen and stack several together to make a light filter. Over the next couple of weeks remove one screen at a time to acclimate the corals to the more intense lighting.

    You might check the wiring in the end caps or your T-5 fixture, most have stab connections and maybe one wire has come loose breaking the circuit. This used to happen with my old VHO fluorescents sometimes when I moved the canopy or lid.
    If you don't need a complete new fixture you might look at the DIY ballasts and end caps at Hellolights and mount them in what you have.

  3. #3
    CR Member
    Join Date
    Apr 2014
    Location
    Downriver, MI
    Posts
    12
    First Name
    Angela

    Default

    Thank you!

    Not having to replace the whole fixture would be nice. I'll take apart what I have (an old Finnex T5 fixture) and see what we can see. I usually actively avoid DIY if it involves electricity, but will make an exception for the tank.

  4. #4
    CR Member
    Join Date
    Apr 2014
    Location
    Downriver, MI
    Posts
    12
    First Name
    Angela

    Default

    I had forgotten I know a young electrician! He was nice enough to take it apart and test all the guts.

    One of the ballasts needs replacing. It is a two ballast fixture. Any opinion on whether I should replace both ballasts or just the bad one? His opinion was just fix what wasn't working....

  5. #5
    CR Member
    Join Date
    Sep 2009
    Location
    Swartz Creek MI
    Posts
    821
    First Name
    Mike

    Default

    I'd replace both, since you have it apart.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

About CaptiveReefs

    If you are interested in learning about reefkeeping or have a problem with your reef, our reefkeeping community is here to help. Feel free to ask a question or search our site. We have lots of experienced reefkeepers that are willing to provide free reefkeeping advice!

    Besides being a great resource for all levels of reef aquarium hobbyists, CaptiveReefs is a social experience that will enhance your enjoyment of reefkeeping. CaptiveReefs is committed to connecting reefkeepers with the support and information they need to grow beautiful coral reef aquariums.

Information

Connect with Us