Search:

4 Mean Well ELN-60-48D dimmable driver for sale.

Bought for LED project, but I decided to go in a different direction.

3 have never bee opened and used.
1 was opened, and connected for testing...

Control and power will be separate.

There are 4 lights with + & - each.

The control will be the handled by the Cat 5 cable and the power will be handled by the 18-8 thermostat wire (The specs...

No I'm not using a RJ-45 connect.
The Reef Angle and LDD board has screw down terminals and the lights have size M power connectors.
Also I'm probably going to do it this way.

Cat5e going from...

I can see that. It looks very similar to phone wire.

I would be using all eight wires (or all 4 pairs). I have 2 fixtures that have 2 channels each.

I'm looking at some some Thermostat wire now, which is 18 gauge and I can get in 8 conductor.

Thank you for your help.

I'm going to use it for the signal wires, but I also wanted to use it to send the actual power to the fixture so I only have 1 wire running to the fixtures, from the drivers.

Thanks.

I'm concerned about Amps too.

I think the LED's are pulling 1.5 amps per channel, unless I figured it wrong.
144w for the whole fixture (according to the listing) 144/48=3amp for the...

I want to run a single Cat5e cable from my Meanwell LDD driver to my lights to control the lighting.

The distance would be about 5-6 feet from driver to lights.

These are the lights.
Aquarium...

My Anemones, Toadstool Leather, Frogspawn, and Kenya tree all hated the 25 at full power on the stock controller.
I wound up taking the 25's out of the tank and putting the 40 in controlled with the...

Here is a video of 1 WP25 in my 55 gallon.


http://www.youtube.com/watch?v=Kae5-viKMpM

I think it is still to strong, so I hooked it up to my Reef Angel and left the speed at a 35-50% ramp I...

I didn't have room for a small 10 gallon tank, but I bought one for $15 and sanded the black plastic frame off the sides and it fits perfectly in the space I had.

The WP -25 is out and a bunch have already made it to the US.

Mine came to my office this morning.
I'll put them in and take some video when I get home after the son is in bed.

Here are some...

Ok. I finally heard back from Wynstan.

He says....



I don't now who has the WP25. (Fish-Street does not have it on their website).

That 8000l/h seems high. it converts to 2,113 g/h.

Yes. Reef Angel is selling the pump as a stand alone along with the cable needed to connect it to the RA.
That same cable has been modded to work on an Apex.

The latest release date I've heard...

Yeah, I want to use it for top off water storage so water that touches it is going to go in the tank.
Gotta look into to this more thorough.

Thanks.
You used this on a tank?
I'm assuming you haven't had any ill side effects like high phosphates and all your stock is alive.

Does any one know if Flex Seal is safe for sealing plywood aquariums?
flexsealdirect dot com

Announcement. One of the controller companies is now offering a stand alone WP40 with attachment cable on their web site.

I don't want to say who or give a link for fear of getting the thread...

I was going to go with...

Imagine putting a fish your tank and telling to stay in one place because it looks good there, but I liked the other one better.