Holding baffles in place?

[MizTanks]

I haven't any clamps. How else can I hold the baffles in place while I silicon them? Got my lines drawn! Lol

[FlynnFish]

I use duct tape on the ends of the baffles at the tank sides.

[Tom@HaslettMI]

I've also heard people use the blue painters tape.

Also, be sure to draw the lines on both sides of the tank. You don't want crooked baffles!

[MizTanks]

Shoot Tom!! I had a hard enough time drawing them on one side-lol.

[Rabidgoose]

I'm way behind on this but how many chambers is your sump and is the middle a fuge? Looks like a baffle on the right and a bubble trap on the left side. Like I said I'm behind but I couldn't find a build thread () so I'm sure this has all been hashed over but I'm a little confused.

chuck

[MizTanks]

Hi Rabid!! Your not behind at all. I haven't started a build thread yet. Just waiting til I get all supply's together.

This will be a three chamber sump/fuge.

[tcp316]

I set my sump on its end and used thick books to hold the glass until I could silicone the baffle in place. It worked for me.

[dputt88]

i always used books and tape

[Poseidon]

Blue painters tape.

[MizTanks]

Thanks everyone! Baffles are in done did it! Lol