AWESOMEEEE mini surge

[Corvette Reefer]

STEPS TO BUILD IT!

1) The U-tube - I made mine with a U- tube i had laying around and extended it a little longer on the end for more water. Also drill a hole above your water line, this is a air release.

2) The OUTLET - Decided how you want it to enter the tank with some type of director, i used a 2 way deflector and I'm goning plug on outlet to make it stronger but you could use anything you have.

3) CUT HOLE IN WATER CONTAINER - You can use any water container you want, i just had a gallon jug available so its what i used, you could use something allot nicer.

4) PUMP AND HOSE - You only need a small pump nothing to large unless you are doing a huge surge device for a big tank. Connect hose to pump.

ASSEMBLY

- Hose in top of container
- Shorter end of U-tube in container hole
- Attach water deflector on outlet
- Mount above tank
- Plug in

FINISHED PRODUCT

INSTALLED ONTO TANK

THE ULTIMATE MINI SURGE DEVICE!

Print out the steps

Corvette Reefers contest entry